Washing machines are never silent, but new or louder noises usually mean something is wearing out or something is caught where it should not be. The type of noise and when it happens tell us a lot.
Safe checks to try first
Always switch the machine off at the wall before checking anything inside it.
- 1Check pockets and the drum for coins, keys or hair clips.
- 2Make sure the machine is level and all four feet touch the floor firmly.
- 3If the machine is new, check that the transit bolts have been removed.
- 4Try a smaller, balanced load to see if the noise changes.
Common causes
Roaring on spin: worn bearings
A rumble that gets louder as spin speed increases is the classic sign of worn drum bearings.
Banging: shock absorbers or suspension
Worn shock absorbers or broken springs let the drum knock against the cabinet.
Rattling: objects in the drum or pump
Coins and bra wires rattle between the drum and tub, or in the pump.
Humming: blocked pump
A pump humming without draining is jammed or failing.
Squealing: belt or motor
A worn belt or motor bearing can squeal on belt drive machines.
When to call a technician
- A roaring spin noise that is getting louder each week
- Loud banging even with a balanced load
- Grinding or scraping when you turn the drum by hand
How we fix it
Drum & Bearing Replacement
Fix that roaring spin. Bearings, seals, spider arms, shock absorbers and suspension springs replaced properly.Motor & Carbon Brush Repairs
Drum not turning? We repair motors, carbon brushes, belts, capacitors and direct drive inverter systems.Installation & Plumbing
Correct installation of new machines, including transit bolts, inlet and drain connections, levelling and a test wash.Frequently asked questions
Why is my washing machine so loud when spinning?
The most common cause is worn drum bearings, especially if the noise gets louder as the spin speeds up. Unbalanced loads, worn shock absorbers and an uneven floor are other causes.